Scoring Saw Blade

Scoring Saw Blade
Details:
Circular saw blade for wood
Circular saw blade is a common cutting tool that can be installed on many different machines,such as circular saws, table saws, miter saws, and panel sizing saws, just to name a few.
Send Inquiry
Description
Send Inquiry

Huizhou Feisite Precision Tools Co., Ltd. is one of the most reliable manufacturers and suppliers of scoring saw blade in China, also supports customized service with reasonable price. Welcome to buy advanced scoring saw blade in stock here from our factory. Contact us for quotation and free sample.

 

What is te difference between Rip cut and cross cut?

 

Cutting wood along the grain is a rip. Cutting aginst the grain across it is a crosscut.
Cutting a board along its length is a rip. Cutting a board across its width is a crosscut.

On a tablesaw:
→If you're cutting along the grain, using a rip blade gives best results. If you're cutting across the grain, a crosscut blade gives best results.

→whether you're cutting across the grain or with the grain, if you're cutting along the length, you're ripping; using the rip fence and rip techniques.

→whether you're cutting across the grain or with the grain, if you're cutting across the width, you're crosscutting; not using the rip fence, and using either a miter guage or crosscut sled or similar.

If you use a rip blade for cross cut,you are asking for kickback.Besides there are also combination saw blades and general-purpose blades. Choosing the right saw blade can significantly impact your woodworking or construction projects.

 

product-1200-622

 

Specification of the blade

 

For example: 100*2.8/3.6*(12+12)T ---- Alternate conical Teeth/ATB/Conical Teeth
Blade Diameter: 100mm to Max 200mm
Kerf size: 2.8mm to Max 5.3mm
Blade thickness:2.2mm to Max 3.6mm
Tooth count:24pcs to Max 36pcs

 

Purpose of scoring saw blade

 

Scoring saw blade is designed to make a shallow cut on the bottom surface of the workpiece,creating a groove that helps to prevent tear-out during the cutting process. This can result in a cleaner and smoother cut.

To cut the board with covers,no matter which type of tooth and no matter more or less teeth,you cannot get a very clean cut if wihtout a shallow cut first.(Board with covers)

 

Circular saw blade teeth introduction

 

product-364-410
product-364-410
product-457-409

 

1.Flat Top Grinding(FTG)
"Mainly used on rip blades for fast, efficient cuts along the grain. A square (also Flat or Flat Top) Grind is durable and long lasting. It is used for ripping and can be used on general purpose
Advantages: Strong, straight cutting,find bottom and easy to maintain
Disadvantages: Takes a lot of force and likely to tearout on exiting cut. Not a good design for chip removal."
 

2.Alternate Top Bevel(ATB)
"These trim and cross-cut blades give scratch-free POLISHED cuts on wood,usually with thin Kerf design:
→ which can saves 1/4 wood loss on each cut
→ Feeds easily,both rip cut and accross cut
→ Can be used on all saw machines.
→ Not for slotting a smooth bottom
→ Easy to sharpen"
 

3.Alternate Top Bevel/Raker(ATB/R)
"Easy to know that it is a combination of FTG and ATB,best choice when cutting brittle materials.
The 1 raker tooth is behind of the 4 Alternate Top Bevel Teeth,which is lower and narrower.It removes the V-shaped piece of material left in the center of the cut by the alternating top bevel teeth
Advantages: Little tear out, good chip removal and straight cutting
Disadvantages: Hard to sharpen without expensive equipment, easy to chip and wears rapidly."
To be continued... ...
 

Hot Tags: scoring saw blade, China scoring saw blade manufacturers, suppliers, factory, Edge Banding Saw Blade, Diamond Blade for Circular Saw, Grooving Saw Blade, Saw Blade for Sliding Table Machine, Frame Saw Blade, Solid Wood Saw Blade

Send Inquiry