The tracking knife of the edge banding machine is a crucial accessory for trimming the edges of wood panels after edge banding. Its main function is to smooth out the sharp four corners of the panel after edge banding, making them into smooth rounded corners. This not only enhances the aesthetic appearance of the furniture but also prevents the sharp corners from causing injuries to people or clothes. It is commonly used in scenarios such as panel furniture production.
| Outside Diameter | Inner Diameter | Cutter Edge | Teeth | Angle | |
|
|
70 | HSK25R | H25 | 4T | |
| 76 | HSK25R | H | 4T | R1.5 | |
| 76 | HSK25R | H | 4T | R2 | |
| 76 | HSK25R | H | 4T | R2.5 |
It usually exists in the form of components, divided into upper tracking knife component and lower tracking knife component, respectively corresponding to the upper and lower edges of the sheet material for processing.
| Outside Diameter | Inner Diameter | Cutter Edge | Teeth | Angle | |
|
|
70 | 16 | H | 4T | R1.5 |
| 70 | 16 | H | 4T | R2 | |
| 70 | 16 | H | 4T | R3 | |
| 76 | HSK | H | 4T | 45° | |
| 76 | HSK | H | 4T | R1.5 | |
| 76 | HSK | H | 4T | R2 | |
| 76 | HSK | H | 4T | R2.5 | |
| 76 | HSK25R | H | 4T | R1.5 | |
| 76 | HSK25R | H | 4T | R2 | |
| 76 | HSK25R | H | 4T | R2.5 | |
| 76 | HSK25R | H | 6T | R1.5 | |
| 76 | HSK25R | H | 6T | R2 | |
| 76 | HSK25R | H | 6T | R2.5 |
And one more different cutter: Bevelling banding cutter
| Outside Diameter | Inner Diameter | Cutter Edge | Teeth | Angle | |
|
|
68 | 16 | H12 | 4T | R1.5 |
| 68 | 16 | H12 | 4T | R2 | |
| 68 | 16 | H12 | 4T | R2.5 | |
| 70 | 16 | H12 | 4T | R1.5 | |
| 70 | 16 | H12 | 4T | R2 | |
| 70 | 16 | H12 | 4T | R2.5 |
The tracking knife made of diamond material has excellent stability when rotating at high speed. The coating on the knife body can reduce the adhesion of glue and wood chips, and it also has a cooling effect.
Hot Tags: diamond trimming cutter for auto edge banding, China diamond trimming cutter for auto edge banding manufacturers, suppliers, factory
